Light-Duty Roll-Up Doors
650 Series
Standard Features Include
- Crafted for easy installation and minimal maintenance, DBCI’s 650 Series provides a reliable solution for a variety of applications.
- DBCI’s 650 Series was engineered to protect and maintain building envelopes without the heavy, weighted elements frequently required in commercial use, and offers a durable and dependable solution to upgrade your building
Documents Include
Curtain
- 26-gauge galvanized, Grade 80 steel
- 5/8" ribbed corrugation
- All latches accept double locks and 7/16" shackles
- Max opening size 10' x 10'
- Super-durable polyester paint
Bottom Bar
- 1 1/2" x 1 1/2" galvanized angles
- Replaceable bulb astragal
Hardware
- Head stops
- Galvanized steel handles
- Steel brackets
- Shielded radial bearings for smooth operation
- Ratchet tensioning device
- Many latch options
Dead Axle-Drum Assembly
- 1 O.D. steel axle
- Utilizes 9 1/2", 18-gauge drums
- Oil-tempered helical torsion springs are factory lubricated
Guide System
- 18-gauge galvanized steel
- Polyethylene guide strips provide easy, quiet operation
Options
- Available in sizes up to 10' x 10' and in over 30 different colors
650 Series Data Sheet
650 Shop Drawings
Color Chart 650 Series
ADA Kit Brochure 650 Series
DASMA Rolling Door Technical Data Sheet #276
EasyRoller Motor Data Sheet 650 Series
nS Series
Standard Features Include
- TWO 9-gauge SECURITY CLIPS that extend fully into the guide.
- Firmly anchored with 14-gauge SUPPORT ANGLES screwed into the floor for enhanced stability and support.
- Roll-formed clear acrylic coated galvanized steel BOTTOM BAR reinforced with a 1-1/2” x 2” x 12-gauge full-width galvanized angle. Lift handle(s) installed on exterior side of bottom bar with interior stop clips.
Documents Include
Pre-Lubricated Springs
- Factory lubricated to protect them from environmental elements
- Enclosed in a tube for lifetime protection
- Provides for smooth door operation
Dead Axle and Barrel Assembly
- Enclosed spiral barrel houses dead axle assembly
- Offers durability and smoother operation as weight is distributed throughout the barrel
Ratchet Tensioning Device
- Allows simultaneous fine tuning of springs due to eight different positions on the tension wheel
- Equal pull on left and right sides to ensure balanced operation of the door
Enhanced Security
- Robust lower bar, equipped with six secure clips that smoothly glide within the guides
- Firmly anchored guides on the floor
- Enhanced stability and support
26-Gauge Corrugated Door Curtain
- Manufactured from galvanized grade 80 steel
- Coated with super durable polyester paint in more than 30 color options
Insulated Version Available
- Side and top draft stops included
750 Series
Standard Features Include
- The 750 Series from DBCI is wind load rated and ideal for light-duty use in carports, barns, sheds and self-storage/commercial unit mix.
- Our industry-leading 3rd Generation roll-up doors are manufactured to be durable and easy to install. The 750 Series self-storage door is particularly well-suited for use in coastal areas or other locations prone to high wind speeds
Documents Include
Curtain
- 26-gauge galvanized, Grade 80 steel
- Full height felt tape
- Available in sizes up to 10'0" x 10'0"
Bottom Bar
- 1-1/2" x 1-1/2" galvanized angles
- PVC bulb astragal
Guide System
- Dual polyethylene wear strips reduce friction and muffle noise
Dead Axle-Drum Assembly
- Enclosed spiral barrel houses dead-axle assembly
- Fitted with grease filled, shielded radial ball bearing
Hardware
- Head stops
- Galvanized steel handles
- Steel brackets
- Shielded radial bearings for smooth operation
- Ratchet tensioning device
- Many latch options
Options
- Available in sizes up to 10'0" x 10'0" and over 30 different colors
750 Series Data Sheet
750 Shop Drawings
Color Chart
EasyRoller Motor Data Sheet
1950 Series
Standard Features Include
- The 1950 Series commercial-style roll-up door utilizes 9 1/2" drums instead of 12" drums, which allows it to operate quietly and requires less headroom during installation.
- A low overhead solution, this metal roll-up door is made of 26-gauge galvanized, Grade E steel with ribbed corrugation and is specialized for light-duty use.
Documents Include
Curtain
- 26-gauge galvanized, Grade E hard steel
- 5/8" ribbed corrugation
- Max opening size 12' x 14'
- Super-durable polyester paint
Bottom Bar
- 2" x 1 1/2" galvanized angles
- Bulb astragal
- Stainless steel nuts and bolts
Dead Axle-Drum Assembly
- 1" O.D. steel axle
- Pre-lubricated, enclosed springs
- Utilizes 9 1/2" drums
- Shielded steel ball bearings in drums
A.C.E. (Advanced Curtain Engagement) Guide System
- Galvanized steel
- Bolt on Head Stop
- Polyethylene wear strip
- Pre-punched holes for lock and attachment fasteners
Hardware
- Stamped Axle Support and Tensioner Assembly
- Slide locks, two per door
- Step plate, two per door
- 12-gauge Galvanized Steel Commercial Brackets
Options
- Chain hoist 4:1 reduction
- Vision panels
- Hood
- Steel mounting plates
- Available in more than 30 color options, subject to availability and varying lead times
1950 Series Data Sheet
1950 Shop Drawing
Color Chart
EasyRoller Motor Data Sheet
2000 Series
Standard Features Include
- The 2000 Series is the perfect door for light-duty applications that require frequent use.
- These quality, low-maintenance roll-up steel doors are ideal for warehouses, car washes, machine shops, auto body shops, and more. DBCI's commercial-grade steel curtains are designed to meet or exceed operational requirements, and the 16-gauge 12" drums are easy to retract and maintain.
Documents Include
Curtain
- 26-gauge galvanized, Grade 80 steel
- 5/8" ribbed corrugation
- Max opening size 12' x 16'
- Super-durable polyester paint
Bottom Bar
- 2" x 1 1/2" galvanized angles
- Bulb astragal
- Stainless steel nuts and bolts
Guide System
- 1 5/16" O.D. steel axle, 14-gauge
- Utilizes 12", 16-gauge drums
- Shielded steel ball bearings in drums
- Pre-lubricated, enclosed springs
A.C.E. (Advanced Curtain Engagement) Guide System
- 16-gauge galvanized steel
- Adjustable bolt on head stop
- Polyethylene wear strip
- Pre-punched holes for lock and attachment fasteners
Hardware
- Saddle clamps with set fasteners
- Slide locks, two per door
- Step plate, two per door
- 1/4" steel angle T-bracket
Options
- Chain hoist 4:1 reduction
- Vision panels
- Hood
- Steel mounting plates
- Motor operated
- Available in more than 30 color options, subject to availability and varying lead times
EasyRoller Motor Data Sheet
ShedMaster Motor Data Sheet
Enhancing Your Investment
We understand that your commercial roll-up doors and carports need to function flawlessly day in and day out. That’s why we offer comprehensive repair, maintenance, and modification services. From routine inspections to emergency repairs, our team is equipped to keep your investments in optimal condition. Whether it’s updating an existing system or making adjustments to meet new requirements, we’ve got you covered.
Repairs
Quick and efficient repairs are essential to maintaining the functionality of your roll-up doors and carports. Our expert team promptly addresses issues to ensure minimal disruption and maximum reliability.
Maintenance
Regular maintenance is key to extending the life of your roll-up doors and carports. We offer thorough inspections and upkeep services to keep your systems running smoothly and efficiently.
Modifications
Need to adjust your existing roll-up doors or carports? Our modification services adapt your systems to meet evolving needs, enhancing performance and functionality with precision.
Proudly Serving Texas
Our reach extends far and wide across Texas, including the bustling areas of Houston, Austin, San Antonio, Corpus Christi, and beyond. From urban centers to surrounding communities, PJ Roll Up Doors is committed to bringing top-quality service and craftsmanship to every corner of the state. No matter where you’re located, our expert team is ready to deliver the solutions you need.
Houston Area
Austin Area
San Antonio Area
San Antonio Area
Trusted Partners and Manufacturers
We collaborate with leading manufacturers to provide you with the highest quality roll-up doors and carports. Our trusted partners, including Asta America, Janus International Group, and others, ensure that every product we offer meets rigorous industry standards for durability and performance.
Let's Talk About Your Project
Ready to elevate your business with custom commercial roll-up doors or a tailored carport? Let’s get started on a solution that’s just right for you. Contact PJ Overhead Doors today at (281) 939-4236 to discuss your project and schedule a consultation. We’re here to ensure your property is secure, functional, and looking its best.
A family-owned business specializing in custom commercial roll-up doors and carports across Texas.
ConnecT with us
PHONE NUMBER
EMAIL ADDRESS
ADDRESS
19820 Fm 1485 Suite G New Caney Tx 77357
Quick Links
Proudly Designed by Randle Media